Main Yard Hours



 Monday – 7:00am – 5:30pm
 Tuesday – 7:00am – 5:30pm
 Wednesday – 7:00am – 5:30pm
 Thursday – 7:00am – 5:30pm
 Friday – 7:00am – 5:30pm
 Saturday – 8:00am – 12:00pm

  *Closed Long Weekends including Saturdays*


 Recycling Yard Hours

 Monday – 8:00am – 5:00pm
 Tuesday – 8:00am – 5:00pm
 Wednesday – 8:00am – 5:00pm
 Thursday – 8:00am – 5:00pm
 Friday – 8:00am – 5:00pm
 Saturday – 8:00am – 12:00pm

 *Closed Long Weekends including Saturdays*

 We offer a wide variety of services at BIM to fit your every need.

WATERJET

1440724347809

OMAX 80x-1 DUAL HEAD CUTTING SYSTEM 60,000 PSI PUMPS

What do you get when you have a machine that can, every minute, force a gallon of water and over a pound of abrasive sand through a hole the size of a pin point at Mach 3? A machine that will cut or etch the most intricate designs in virtually any material you like (steel, titanium, marble, glass, plastic, rubber, carbon fibre, brass, even wood) up to 6 inches thick!

Cut Size: 6’4” x 16’6” max

Up to 6.5” thick everything but tempered glass

Tolerances +/- .005”


PLASMA

1440723837232

400 AMP HYPERTHERA MASTERGRAPH EXTREME

Cut size: 10′ x  36′ 2″ max.

  • Mild steel cut capacity
    Dross free   38 mm (1-1/2″)
    Production pierce   50 mm (2″)
    Maximum cutting capacity   80 mm (3.2″)
  • Stainless steel cut capacity
    Production pierce   45 mm (1-3/4″)
    Maximum pierce (requires controlled motion process) 75 mm (3″)
    Severance  80 mm (3.2″)
  • Aluminum cut capacity
    Production pierce   38 mm (1-1/2″)
    Maximum cutting capacity   80 mm (3.2″)

Tolerances +/- 1/16″ up to 1″ thick

+/-3/32″ from 1″ – 2″ thick

260 AMP HYPERTHERM MILLENNIUM PLASMA / MULTI-TORCH (MULTI TORCH SPECS: 5” PLATE MAX)

Cut Size: 10’ x 24’10” max

  • Mild steel cut capacity
    Dross free   32 mm (1-1/4″)
    Production pierce   38 mm (1-1/2″)
    Maximum cutting capacity   64 mm (2-1/2″)
  • Stainless steel cut capacity
    Production pierce   32 mm (1-1/4″)
    Maximum cutting capacity   50 mm (2″)
  • Aluminum cut capacity
    Production pierce   25 mm (1″)
    Maximum cutting capacity   50 mm (2″)

 

Tolerances +/- 1/16” up to 1” thick

+/- 3/32″ from 1″ – 1-1/2″ thick

Multi-torch specs 5″ plate max.

5″ plate max.

 


LASER

Laser+1

MITSUBISHI 2.7 KW DUAL SHUTTLE TABLE

Cut Size: 5’ x 10’ max

½” mild steel max

5/16” stainless steel max

5/16” aluminum max

Tolerances +/- .003”


BRAKE

BREAK+3

ACCURPRESS 175, 250, 400 TON BRAKE:

175 Ton Brake: Bends 10 gauge mild steel up to 12 feet long

250 Ton Brake: Bends ½” mild steel up to 4 feet long

  • Bends 3/8” mild steel up to 6 feet long
  • Bends ¼” mild steel up to 12 feet long

400 Ton Brake: Bends ½” mild steel up to 10 feet long (400 ton brake shown above)

  • Bends 3/8” mild steel up to 12 feet long
  • Bends ¼” mild steel up to 16 feet long
1443570893118
 

SHEAR
1440725250163

DURMASHEAR:

½” shear (ALUMINUM/SS ONLY) up to ¾” AL and 3/8” SS **shown in picture on website, video shown is the ¼” accurshear**

 

ACCURSHEAR:

¼” shear-shears 24 gauge up to ¼” thick (mild steel) up to 10 feet long

½” shear- shears 12 gauge up to ½” thick (mild steel) up to 12 feet long


LINDE GAS

LINDE6LINDE7

BIM started selling welding gases in the late 1970’s. We saw a need to offer Brooks and area, better welding gas access and better pricing. The original company we dealt with was Canox, ( Canadian Oxygen), a subsidiary of BOC, (British Oxygen Company). Later on Canox was changed to BOC, to represent that BOC was an international company. BOC was bought out by, The Linde Group of Germany approx. 6-10 years ago. The Linde Group is the largest industrial gas supplier in the world. BIM is the largest distributor for Linde in Canada. We have a very strong relationship with Linde, and have been able to arrange good buying power with them.


PLATE ROLLING

14431192726541443119225863

LINMAC ROLLER

All pieces must be pre-broke before rolling to a complete circle. All pieces must not be more than 60” long. Pieces cannot be thicker than .250 of an inch

.250 minimum ID is 7.5 inches

.188 minimum ID is 7.75 inches

10 Gauge ID is 8.5 inches

12 Gauge ID is 9 inches

14 Gauge ID is 9.5 inches

16 Gauge ID is 10 inches

ROLLER #1 (BIG BERTHA)

Capable of rolling flat material from 14 gauge to ½” mildsteel in the following dimensions:

14 gauge to 10 gauge – minimum 14” outside diameter (up to 8’ long)

3/16” to ¼” plate – minimum 14” outside diameter (up to 6’ long)

3/8” to ½” plate – minimum 14” outside diameter (up to 2’ long)

(*some small diameter ¼” , and all 3/8” and ½” plate: pre-braking required*)

Capable of rolling structural square tubing up to 1-1/2” outside diameter (minimum wall thickness of .083”) to a minimum outside diameter of 24” as well as rolling Rebar into circles with a minimum of 5” inside diameter.

ROLLER #2 (DAVI ROLLS)

Capable of rolling flat material from 20 gauge to 3/8” mild steel in the following dimensions:

20 gauge to 14 gauge – minimum 14” outside diameter (up to 10 foot long)

12 gauge to 1/8” sheet – minimum 12” outside diameter (up to 10 foot long)

3/16” to ¼” plate – minimum 15” outside diameter (up to 8 foot long)

5/16” plate – minimum 30” outside diameter (up to 6 foot long)

3/8” plate – minimum 36” outside diameter (up to 4 foot long)

*some small diameter ¼”, and all 3/8” plate: Pre-braking required*


BANDSAWING

Bandsaw+2Bandsaw1

S-23 SERIES BANDSAW (2 SAWS)

S-20 SERIES BANDSAW (1 SAW)

VW-18 SERIES 2 (PICTURED ABOVE)

These saws feature scissor style, swing head design and provide exceptional miter cutting capability for light to medium applications. Features also include 90-45 degree angle cuts, hydraulic scissor lift and vice. 20” wide and 16” high cutting capability at 90 degrees

The VW 18 Series 2 Is a manual vertical bandsaw with the ability to miter from 45 degrees left or right. Our model is able to cut at 90 degrees with a 3 degree tilt of the head. Cut capacity of 22” high and 18” wide at 90 degrees. A very reliable choice for all your medium duty projects.